Oval Racing Parts

Oval Racing Parts – High Performance Oval Components

  • agxaxles2agxaxles1
    Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.
      • Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
  • dsc_2553dsc_2561
    Used in conjunction with Strange Oval axles, our spline tolerances, between the axle splines and drive plate splines, is usually tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval offers several steel drive plates that will accommodate a camber range of zero to 4 degrees. Depending on where your current rules regarding allowable camber lies (if any)
      • Nickel Chromium Molybdenum steel is used for excellent hardenability, strength and toughness – This provides less spline wear and general drive plate longevity
      • FEA (Finite Element Analysis) analyzed lightweight scalloped and pocketed design
      • Marquenching heat-treat processing reduces internal stresses and stress cracks
      • Electro-polished surface enhances surface finish which is especially beneficial on the spline flanks for reducing friction, wear and operating temperature
    • Broached splines promote consistent fit and misalignment angleDrive Plate #ADC100 can be run with standard crowned spline axles that can accommodate 0 to 2 degrees of camber (with this drive plate, crowned axles are what sets any camber angle)
  • stg_1779pstg_1780p
    Used in conjunction with Strange Oval axles, our spline tolerances, between the axle splines and drive plate splines, is usually tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval offers several steel drive plates that will accommodate a camber range of zero to 4 degrees. Depending on where your current rules regarding allowable camber lies (if any)
      • Nickel Chromium Molybdenum steel for excellent hardenability, strength, and toughness to provide good spline wear and drive flange longevity
      • FEA (Finite Element Analysis) analyzed lightweight scalloped and pocketed design
      • Dry film solid lubricant applied to insert gear to prevent galling and increase lubricity
      • Marquenching heat-treat processing reduces distortion and residual stress
      • electropolishing enhances surface finish especially beneficial on the spline flanks for reduced friction, reduced wear, and lower operating temperatures
    • Broached splines promote consistent fit and misalignment angle
    • 2 piece drive plate #ADC102 can be run with standard crowned spline axles and can accommodate 0 to 3.5 degrees of camber with the articulating splined insert. This drive plate must be used with the standard crowned splined axles (not straight splined axles – see drive plate ADC102)
  • stg_0209pstg_0215p
    With a weight savings of up to 1 ¾ lbs. as compared to the standard "Daytona" cast iron pinion retainers, Strange Oval produces 2 variations of billet steel pinion retainers. While lighter in weight, our pinion retainers maintain a lower axial and radial deflection rate improvement of 20% over the cast iron counterpart. By reducing pinion deflection, the Strange Oval pinion retainers improve gear life
      • Heat treated, fully machined, billet chromoly steel construction
     
      • Improved rigidity and lighter weight than the popular daytona pinion retainer
     
      • Nascar approved
     
    • Iron shed (isp105) support available for enhanced gear mesh oiling
    • Pinion Retainer # DPC100 (w/o external lubrication line attachment feature)
  • stg_1799pstg_1800p
    With a weight savings of up to 1 ¾ lbs. as compared to the standard "Daytona" cast iron pinion retainers, Strange Oval produces 2 variations of billet steel pinion retainers. While lighter in weight, our pinion retainers maintain a lower axial and radial deflection rate improvement of 20% over the cast iron counterpart. By reducing pinion deflection, the Strange Oval pinion retainers improve gear life
      • 4140 pre heat treated steel provides increased strength and stability over cast iron
      • Precision bearing bore alignment and concentricity for better overall gear efficiency
      • Has constant bearing spacing for easier and more accurate preload set up
      • Has splash type lubrication features as well. Does not have to be pressure fed
      • Front lube return provides several features
      • Returns lube directly to gear mesh
      • Allows for constant lubrication to pinion bearings
      • Lube being returned to critical areas protects and allows a low lube condition
      • Shortens the length of lubrication cooler lines
    • Less likely to break front return fitting as to a exposed fitting on back of housing
    • Pinion Retainer # ISP105 (with external lubrication line attachment feature)
  • stg_0181stg_0189

    Original, M-4141-H, 3.250” Cast Iron Case

     

    Available directly from Strange Oval.

    Strange has been the only manufacturer approved and sold by Ford Racing to make their cast-iron 9” rear cases (for 3.25” carrier bearings) since its inception. Strange is the sole supplier to Ford Racing for their cast rear case (exclusive to Ford Racing) sold into the Sprint Cup Series. Strange Oval now offers the same N Case (cast iron version only) as sold through Ford Racing. Approved by NASCAR, the traditional nodular iron case offers a more economical alternative to the steel case (M-4141-HS - exclusively available thru Ford Racing). N1908 (Strange Oval Part Number) - 3.250” (M4141H) 9” cast iron case with original chrome-moly caps and cast adjuster nuts. *$290.28 each. N1957M - Optional billet steel adjuster nut (fits N1908/M4141H case). *$20.70 pair
  • agxaxles2agxaxles1
    Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.
      • Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
  • agxaxles2agxaxles1
    Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.
      • Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
  • agxaxles2agxaxles1
    Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.
      • Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
  • agxaxles2agxaxles1
    Strange Oval KERA Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.
      • Ultra high strength low alloy steel offers outstanding yield and tensile strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
     
  • Drive FlangeDrive Flange
    Strange Oval Drive Plate Features & Benefits: Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)
      • Lightweight and high strength billet aircraft aluminum construction
      • Pressed in steel spline insert for increased wear resistance and long spline life
      • Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
      • Fully CNC manufactured for consistent and accurate fit
    • Mill scalloped to reduce weight
  • Drive FlangeDrive Flange
    Strange Oval Drive Plate Features & Benefits: Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)
      • Lightweight and high strength billet aircraft aluminum construction
      • Pressed in steel spline insert for increased wear resistance and long spline life
      • Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
      • Fully CNC manufactured for consistent and accurate fit
    • Mill scalloped to reduce weight