When it comes to radical, it’s hard to beat Late Model dirt. These cars range in horsepower from a 400HP crate engine to an 850HP engine that rivals NASCAR Sprint Cup. Many popular NASCAR drivers have a team that runs one or 2 cars on tour with the World of Outlaw Late Model Series or the Lucas Oil Late Model Series. Who supplies the teams with the Late Model racing parts they need to win? You guessed it, Strange Engineering. Everything from our revolutionary Wrap Axles (KERA), to our bullet-proof rear axle Wide 5 Hub Drive Flanges, Strange’s oval track racing parts help turn any racing team into a winning one. For the best drive plates and race axles on the market, don’t just race, RACE STRANGE!

Showing all 8 results

  • STG 4346 P

    5 Bolt cambered Drive Flange ADW530

    Strange Oval Drive Plate Features & Benefits:

    Drive Plate ADW530 (Cambered)

    Strange Oval Introduces Their New 5-on-5 Cambered Drive Plate For Asphalt Late Model. They fit Howe, PCR & Vogel style 5-on-5 hubs.

    It’s over 1 pound lighter than other equivalent drive plates available and allows for up to 2° of rear camber with straight splined axles.

    The hub cap comes with 3 socket head cap screws.

    The (optional) race-day aluminum bullet weighs 0.35 lbs. and slides over the existing flat hub cap and is secured with the same flat cap socket head screws.

    The bullet cap has an indexed fit so the pre-machined lug nut lines on the cap line up exactly with the wheel studs every time.

    The axles can be removed without having to remove the drive plate from the hub. Simply remove the drive plate hub cap and pull the axle straight out of the axle tube.

    $310.00
  • agyaxles2

    Gun Drilled Axles

    Strange Oval KERA Late Model Asphalt Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.

      • Ultra high strength low alloy steel offers outstanding yield and tensile
        strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer
        and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart
        a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers
    $229.00
  • agyaxles2

    Late Model Dirt Axles

    Strange Oval KERA Late Model Dirt Axles have been, and continue to be utilized by many of the top teams in the NASCAR Sprint Cup, Nationwide & Truck series since 2008.

      • Ultra high strength low alloy steel offers outstanding yield and tensile
        strengths, fatigue properties, and high toughness
      • Vertical rack heat treating controls distortion
      • CNC hobbed splines tightly controls tolerances for even torque transfer
        and consistent misalignment angle of drive flanges
      • Generous transition fillet radii essential to reduction of stress risers
      • Additional attention directed to non-aggressive machining to impart
        a minimum amount of residual tensile stress
      • Shot peening provides increased torsional and bending fatigue life with the application of residual compressive stress
    • Isotropic superfinishing reduces spline wear, lowers operating temperature, and minimizes micro stress risers

     

    $229.00
  • Drive Flange

    5 Bolt Axle Drive Flange ADW520

    Strange Oval Drive Plate Features & Benefits:

     

    Drive Plate ADW520 (for cambered rear applications)

      • 2 degrees of maximum misalignment
      • Hardened components to reduce wear and increase useful life
      • Polished articulating insert gear to improve efficiency and decrease running temperatures
    • Drive flanges are plated to prevent rust
    • This Strange Oval drive plate ADW520 consists of an all-steel housing and a tempered steel splined insert that articulates within the steel housing and allows for up to 2 degrees of rear camber adjustment. This drive plate is specifically for the 5-Lug, WIDE-5 hub applications. Used in conjunction with Strange Oval axles, our spline tolerances (between the axle splines and drive plate splines) are tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval drive plates will work with virtually every 24-spline outboard axle end on the market.
    $229.00
  • Drive Flange

    5 Bolt Wide 5 Hub Drive Plate ADW500

    Strange Oval Drive Plate Features & Benefits:

    Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)

      • Lightweight and high strength billet aircraft aluminum construction
      • Pressed in steel spline insert for increased wear resistance and long spline life
      • Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
      • Fully CNC manufactured for consistent and accurate fit
    • Mill scalloped to reduce weight
    $99.00
  • Drive Flange

    8 Bolt Axle Drive Flange ADW800

    Strange Oval Drive Plate Features & Benefits:

    Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)

      • Lightweight and high strength billet aircraft aluminum construction
      • Pressed in steel spline insert for increased wear resistance and long spline life
      • Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
      • Fully CNC manufactured for consistent and accurate fit
    • Mill scalloped to reduce weight
    $99.00
  • Drive Flange

    8 Bolt Axle Drive Flange ADW820

    Strange Oval Drive Plate Features & Benefits:

    Drive Plate ADW520 (for cambered rear applications)

      • 2 degrees of maximum misalignment
      • Hardened components to reduce wear and increase useful life
      • Polished articulating insert gear to improve efficiency and decrease running temperatures
    • Drive flanges are plated to prevent rust
    • This Strange Oval drive plate ADW820 consists of an all-steel housing and a tempered steel splined insert that articulates within the steel housing and allows for up to 2 degrees of rear camber adjustment. This drive plate is specifically for the 8-Lug, WIDE-5 hub applications. Used in conjunction with Strange Oval axles, our spline tolerances (between the axle splines and drive plate splines) are tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval drive plates will work with virtually every 24-spline outboard axle end on the market.
    $229.00
  • rear axle seal

    Rear Axle Seals

    With certain diameter Strange Oval axles, you’ll need to replace your inboard axle seals to accommodate the smaller axle diameters (O.D’s). Otherwise, you’ll be getting your rear end fluid into your axle tubes. We supply a very well made economical purpose-built 2 stage inboard axle seals for all of our smaller O.D. axles. We asked SEALS-IT to provide these seals to us.

    SEALS-IT has been supplying NASCAR teams with various seals for over 20 years and it’s all they do.

    These are 2 stage axle seals that have been designed with minimal drag.

    Here are the seals available:

    # AGS094 fits axle (O.D.) diameters from 0.940” to 1.100”

    # AGS110 fits axle (O.D.) diameters from 1.100” to 1.200”

    $32.00